*** We are offering blemished versions of this product at a bargain 40% off per piece. These pieces all have various small scuffs and gauges in the face that are 1/4" to 1/2" long and about 1/16" deep along the front edge. See photos for details.***
This soft aluminum J-rail is used on Shasta trailers and many canned hams as a drip rail.
It mounts on the wall of the trailer covering up the roof edge that is folded down the wall a bit. The J-rail acts as a gutter. The roll formed profile is soft enough to bow as you install it.
Mill finish. Measures approximately 3/4" high and extends out from wall approximately 1/2".
Pre-punched 5/32" holes are approximately 3-1/2" apart. It should be mounted with stainless screws. We recommend placing a strip of butyl tape behind it and a bead of Trempro 635 as a finish bead along the top after installation.
It comes in 94" lengths.
We recommend washing the residual tool oil from this roll formed part before installing. Expect some scratches in the material that can be sanded out.
SPECIAL SHIPPING RULES:
Due to its length, this item and other long items like it are shipped together in a PVC pipe to protect them from damage in transit. Unfortunately, at this time we are not able to ship these extrusions outside the United States and they must ship via FedEx.